Web Specials

Item#	DESCRIPTION listed from smallest to largest	AS IS	RECONDITIONED
176 D	176D- Duriron, 75 Cubic Foot Use Filter Press, (61) 1200mm gasketed filter press plates, 32mm cake thickness, automatic hydraulics, semi-automatic overhead plate shifter, center feed with 4 corner return. Overall dimensions- 250” L x 56” w x 96” H	$62,500	$82,500
240 A	JWI 180-G gas-fired sludge dryer, 2 cu. ft./hr, continuous feed system with SS wetted parts including SS conveyor, SS internal shell, and SS 20 cu. ft. hopper, includes 304SS venturi scrubber with 3/4 HP cast aluminum blower, 460V/230V power usage, 1.5 HP TEFC extruder motor, 1 HP TEFC gas blower motor, 1 HP TEFC scrubber motor, 1/20th HP TEFC cooling blowers, 4-6 GPM @46-145 PSI scrubber water requirement, 500-600 deg. F operating temperature, 250-325 CFM @ 160-200 Deg. F exhaust air, includes control panel to control: temperature set-points, start/run/stall conveyor, scrubber on/off, emergency stop, variable extruder motor speed control, variable conveyor motor speed control, indicators for air purge cycle, conveyor blower, gas burner, extruder power, high temperature lockout.	$30,000	$38,500
330B	Used 20 gallon per minute waste water treatment clarifier, carbon steel construction with plastic settling plates. Sludge section has a sludge rake. Clarifier has 2 per treatment chambers, 1 large section with a flash mixer and 1 smaller section with a slow rake mixer for flocculation addition. The larger section can be used to add an additional chemical (please contact sales, 216-881-7900, to discuss adding a metering pump to this section). Overall dimensions: 123” L x 77” W x 86” H	$9,000	$14,000
886 A	Used Poly Products, Inc. ET-III-W atmospheric evaporator, maximum evaporation rate of 40 GPH. Evaporator was used for 1 week! Polyethylene molded tub with CPVC spray bars and polypropylene nozzle, 160 degree maximum feed temperature at 45 GPM influent flow rate, includes 1 and mist eliminator. The unit also comes with the companion condenser, which allows the user to take the evaporated water and condense it for reuse. The unit also comes with (2) 180 degree ducting pieces necessary to connect the unit and the condenser. The unit also comes with the aggressive solutions package. Overall dimensions of Evaporator: 56"L x 38"W x 69"H.	$13,500	$15,000

Item#

Click to enlarge

DESCRIPTION listed from smallest to largest

AS IS

RECONDITIONED

176 D

176D- Duriron, 75 Cubic Foot Use Filter Press, (61) 1200mm gasketed filter press plates, 32mm cake thickness, automatic hydraulics, semi-automatic overhead plate shifter, center feed with 4 corner return.

Overall dimensions- 250” L x 56” w x 96” H

$62,500

$82,500

240 A

JWI 180-G gas-fired sludge dryer, 2 cu. ft./hr, continuous feed system with SS wetted parts including SS conveyor, SS internal shell, and SS 20 cu. ft. hopper, includes 304SS venturi scrubber with 3/4 HP cast aluminum blower, 460V/230V power usage, 1.5 HP TEFC extruder motor, 1 HP TEFC gas blower motor, 1 HP TEFC scrubber motor, 1/20th HP TEFC cooling blowers, 4-6 GPM @46-145 PSI scrubber water requirement, 500-600 deg. F operating temperature, 250-325 CFM @ 160-200 Deg. F exhaust air, includes control panel to control: temperature set-points, start/run/stall conveyor, scrubber on/off, emergency stop, variable extruder motor speed control, variable conveyor motor speed control, indicators for air purge cycle, conveyor blower, gas burner, extruder power, high temperature lockout.

$30,000

$38,500

330B

Used 20 gallon per minute waste water treatment clarifier, carbon steel construction with plastic settling plates. Sludge section has a sludge rake. Clarifier has 2 per treatment chambers, 1 large section with a flash mixer and 1 smaller section with a slow rake mixer for flocculation addition. The larger section can be used to add an additional chemical (please contact sales, 216-881-7900, to discuss adding a metering pump to this section).

Overall dimensions: 123” L x 77” W x 86” H

$9,000

$14,000

886 A

Used Poly Products, Inc. ET-III-W atmospheric evaporator, maximum evaporation rate of 40 GPH. Evaporator was used for 1 week! Polyethylene molded tub with CPVC spray bars and polypropylene nozzle, 160 degree maximum feed temperature at 45 GPM influent flow rate, includes 1 and mist eliminator. The unit also comes with the companion condenser, which allows the user to take the evaporated water and condense it for reuse. The unit also comes with (2) 180 degree ducting pieces necessary to connect the unit and the condenser. The unit also comes with the aggressive solutions package. Overall dimensions of Evaporator: 56"L x 38"W x 69"H.

$13,500

$15,000

Inventory Of Used Equipment