216.391-POLY (7659)

FEATURES

 

1 Straight-Line Air Flow; Blower, Sprays and Evaporative Panels 2 Large Volume, low RPM, Full Width Blower 3 Patented One-Piece Molded Wet-Selection  NO LEAKS! 4 Double Union, CPVC Ball Valve, for Evaporation Control 5 Maximum Wet area, IN-LINE* for Easy Air & Solution Flow 6 Rounded Turns for Smooth Air Flow 7 Up to 1-1/2 HP, All Ball Bearing Motor, 1.25 Service Factor, 1ø or 3 ø available 8 Up-Facing Exhaust, NO Elbows Needed 9 Custom designed, Stay-Wet Mist Eliminator for Maximum Droplet Retention. Optional "Airscrubber ™" Available for Near-Zero Discharge 10 Choice of Pumps to Fit Your Application

Low Cost Installation Accessories
Ventilation Components include pipes, elbows and rain caps of moded polyethylene for easy, slip-together installation.  Pipe fittings of Schedule 80 CPVC.  El PUMP ™, an air-lift pump for counter-flowing, uses low-pressure air.  LLCS™ (Liquid Level Control System, complete with solenoid valve).

SPECIFICATIONS

Model	ET-II	ET-III-W	ET-III	ET-III-W
Crated Weight:	340 lbs.	290 lbs.	400 lbs.	330 lbs.
Dimensions:	56" Long, 69" High, 29" Wide		56" Long, 69" High, 38" Wide
Blower:	1 hp (2500 CFM) 1 hp*		1-1 1/2 hp (3300 CFM) 1-1 1/2 hp*
Pump Requirements:	16 gpm	21 gpm	24 gpm	35 gpm
Evaporative Area;	700 Sq. Ft.	Variable	1,000 Sq.Ft.	Variable
Bottom Drain:	2" FPT, Gravity Return
Temperature Limits:	Ambiant Air; 40 - 104 F, Solution 40 - 160 F
Vent Ducting:	16" Diameter, Available from POLY PRODUCTS CORPORATION
Floor Space:	(48" x 25")	(48" x 25")	(48" x 34")	(48" x 34")
*available as 110/220V, 1 phase or 230/460V, 3 phase

ET-III-W EVAPORTIVE TANK ™

---

Poly products, Inc.
777 East 82nd Street
Cleveland, Ohio 44103-1817
Phone: 216.391-7659  Fax: 216.881.8991

e-mail:  info@poly-products.com