Water Treatment Equipment (1300)
| INVENTORY # | Click to Enlarge | DESCRIPTION listed from smallest to largest | AS IS | RECONDITIONED* |
|---|---|---|---|---|
| 363 A |
 |
8 GPM CROY Environmental parallel plate lamella clarifier with oil removal section. Steel body unit with oil removal section with floats and pump; clarifier section with honeycomb settling pack. Dimensions: 82" L x 38" W x 85" T. Comes with separate steel holding tank for feed or concentrated oil. Dimensions of holding tank: 37"L x 37"W x 78"T. | $7,000 | $10,000 New floc section with mixer - Add: $4,100 |
| 334 A |  |
15 GPM Horizontal flow cone
bottom clarifier with floc tank. Outermost dimensions: 66" L x
55" W x 84" T.
With New Mixer Add: $1,200 |
$8,000 | 11,500 |
| Just Listed: 378 A |
 |
Great Lakes Clarifier, 30 GPM, 354 sq. ft., of total setting area, no flocculation tank, 60 degree plate incline, SS auger at bottom of clarifier to auger out sludge, 110 Volt 1/4 HP 990 in-lbs. torque auger gear motor, 220 Volt, 1/3 HP, 3500 RPM centrifugal pump for sludge removal, plastic settling plates, (1) 6" inlet, (1) 6: clean water outlet, (1) 2" sludge outlet, 10" freeboard. Overall dimensions: 124"H x 56"W x 97"L. | $11,500 | $16,500 New 3-compartment floc tank with variable speed mixer add: $5,500 |
| 343 A |  |
30 GPM Parkson Type, Lamella, polypro parallel plates, all fiberglass body, 4' x 10' x 10' Tall. Very good condition. | $12,500 | $17,500 |
| Sold! 318 A |  |
30 GPM Parkson, 75/55, with floc tank (no mixer), steel construction. | $8,000 | $12,000 with new plate pack New mixer - Add: $1,200 |
| 302 A |  |
30 GPM Lancy, steel construction, floc tank with mixer. | $6,500 | $9,500 |
| 309 A |  |
30 GPM Met-Chem, floc tank, mixer, pH tank. | $12,000 | $14,000 |
| New: 344A |
 |
30 GPM Met-Chem, parallel plate clarifier with floc tank and mixer; epoxy coated steel body with plastic plates.(6' x 7' x 10' H) | Regular Price: $20,000 | Special Web Price: $19,000 |
| 362 A |
 |
50 GPM Parkson-Type Lamella, parallel plate clarifier, steel body with PVC settling plates, 79" wide x 134" long x 113" tall. No floc tank or mixer. | $15,000 | $21,000 New floc tank and mixer - Add: $4,950 |
| 350 A |  |
60 GPM Lancy parallel plate clarifier, with floc tank and pH adjust compartment. (Does not have mixer or plates) Clarifier dimensions: 9' x 12' x 11' H-- with side catwalk 9' x 18' 11' H. | $7,000 | $17,500 New mixer - Add: $1,450 |
| New: 345 A |
|
60 GPM Met-Chem parallel plate clarifier with floc tank and mixer; epoxy coated steel body with plastic plates. (7-1/2' x 11' x 10'H) | Regular Price: $28,000 | Special Web Price: $26,000 |
| 336 A |  |
60 GPM Great Lakes Clarifier, Lamella style,
with sludge auger in cone bottom, no floc tank or mixer. Outer dimensions
of 7 1/2'x 7 1/2' x 8' H. Projected settling area: 345 sq. ft. New Floc Tank and Mixer: $ 3,900 |
$15,500 | $ 21,500 |
| Just Listed: 374 A |
 |
80 GPM Parkson Lamella, MN#200-55 (200 sq. ft. of settling area, set at 55 degree angle), steel body with plastic settling plates, flocculation tank and mixer not included. Overall dimensions: 103"L x 64"W x 127"H. | $17,500 | $24,500 Floc tank with two compartments and 2 mixers. Add: $7,500 |
| Sold! 371 A |
 |
80 GPM Parkson Lamella, M/N#200-55 with catwalk. Steel body FRP settling plates. Overall dimensions: 110"L x 96"W x 120"H. No floc tank or mixer. | $13,000 | $18,000 With new flash/floc tanks and mixers ADD: $6,950 |
| 367 A |
 |
80 GPM Parkson Lamella, Model 200/55, 8-1/2' L x 64" W x 10' H. Steel body with plastic settling plates. No floc tank or mixer. | $17,500 | $24,500 (Clar only) Price for floc tank and 2 mixers, Add: $9,500 |
| Just Listed: 375 A |
 |
120 GPM Met-Chem style clarifier, steel construction with fiberglass plates, settling area of approximately 440 square feet, with flocculation tank, no mixer. 6’’ flanged waste inlet, 2’’ sample port, 2’’ flanged sludge outlet, 4’’ flanged clean water outlet. Overall Dimensions: 83’’ W x 114’’ H x 140’’ L. |
$21,000 | $28,500 (Mixer add: $2,500) |
| Just Listed: 376 A |
 |
120 GPM Lanco style clarifier, steel construction with plastic settling plates, settling area of approximately 440 square feet, with flocculation tank, no mixer. 6’’ flanged waste inlet, 2’’ flanged sludge outlet, 6’’ flanged clean water outlet. Overall Dimensions: 56’’ W x 114’’ H x 185’’ L. | $20,000 | $28,00 0(Mixer add: $2,500) |
| New: 346 A |
 |
120 GPM Met-Chem parallel plate clarifier with flocculation tank and mixer; epoxy coated steel body with plastic plates. (11-1/2' x 14' x 12'H) | Regular Price: $45,000 | Special Web Price: $43,000 |
| New: 347 A |
|
180 GPM Met-Chem parallel plate clarifier with flocculation tank and mixer; epoxy coated steel body with plastic plates. (12' x 18' x 12'H) | Regular Price: $58,000 | Special Web Price: $55,000 |
| Just Listed: 377 A |
 |
228 GPM Parkson Lamella clarifier, M/N# 570/55, steel construction with FRP settling plates with 570 square feet of settling area, with flocculation tank, no mixer. 12’’ x 6’’ square waste water inlet, 4’’ flanged sludge outlet, 8’’ clean water outlet. Piggy back floc dimensions: 41’’ W x 62 H x 76’’ L. Overall Dimensions: 78’’ W x 150’’ x 185’’ L (standing up). | $24,000 | $31,500 (Rake Mixer in current tank add: $7,900) |
| Sold! 372 A |
 |
228 GPM Parkson Lamella, M/N#570/55. S/N 4621-LGS, Floc tank with no mixers. Floc tank dimensions: 60"L x 40"W x 64"H. Overall clarifier dimensions: 180:L x 68"W x 103"H. | $18,500 | $26,000 With new mixer and gear-reduced rake mixer in above floc tank ADD: $7,900 |
| New: 348 A |
|
300 GPM Met-Chem clarifier with flocculation tank and mixer; epoxy coated steel body with plastic plates. (10' x 28' x 12'H) | Regular Price: $85,000 | Special Web Price: $81,000 |
| 355 A |
 |
344 GPM, Parkson Lamella parallel plate clarifier, Model 860/55, with floc tank and mixer. Epoxy coated steel body with plastic settling plates, 9' wide x 15' long x 17' tall | $40,000 | $60,000 |
*All reconditioned equipment comes with a 30 day warranty
Contact Us: 777 East 82
Street ~ Cleveland, Ohio 44103
(216) 881-7900 ~
FAX (216) 881-8950 ~ info@metchem.com