| INVENTORY # |
Click to
Enlarge |
DESCRIPTION listed from smallest
to largest |
AS IS |
RECONDITIONED* |
| 306
B |
 |
Met-Chem
Style, 10 GPM Used Clarifier,
new plate packs will be added
with reconditioning.
Overall Dimensions: 64 L x 64
W x 60 T
|
|
N/A |
$10,500 |
| 330B |
 |
Used 20 gallon per minute
waste water treatment clarifier, carbon steel
construction with plastic settling plates.
Sludge section has a sludge rake. Clarifier has
2 per treatment chambers, 1 large section with a
flash mixer and 1 smaller section with a slow
rake mixer for flocculation addition. The larger
section can be used to add an additional
chemical (please contact sales, 216-881-7900, to
discuss adding a metering pump to this section).
Overall dimensions: 123 L x 77 W x 86 H
|
$9,000 |
$14,000 |
| 319
B |
 |
US Filter 20 GPM Used
Clarifier, plates set at
a 55 degree angle
Overall Dimensions:
|
|
$8,000 |
$11,500 |
| 320
B |
 |
20 GPM Used Clarifier,
plates set at 55 degree
angle, attached floc box
Consult sales for new
mixer pricing
|
|
$8,500 |
$12,000 |
| Just Listed: 329
B |
 |
20 GPM
USED WASTE WATER TREATMENT
CLARIFIER, carbon steel with
stainless steel liner, flat
bottom with sludge paddle on
bottom, weir tubes on top
for clean water
Overall Dimensions: 133 L x
154 W x 121 H
|
$8,500 |
$26,250 |
| Just Listed: 331
B |
 |
Water Management 30 GPM Waste
Water Treatment Clarifier, Carbon Steel
Construction with PVC inclined plates (unit
currently has no plates, will be added with
recondition), includes two pretreatment tanks
for pH adjust or flocculent addition. Contact
sales to get pricing on adding mixers, pH
probes, metering pumps, etc.
Overall Dimensions: 202 L x 60 W x 122 H
|
$12,000 |
$16,500 |
| 378
A |
 |
Great Lakes Clarifier, used, 30 GPM,
354 sq. ft., of total setting area, no flocculation tank, 60 degree plate
incline, SS auger at bottom of clarifier to auger out sludge, 110 Volt 1/4
HP 990 in-lbs. torque auger gear motor, 220 Volt, 1/3 HP, 3500 RPM
centrifugal pump for sludge removal, plastic settling plates, (1) 6" inlet,
(1) 6: clean water outlet, (1) 2" sludge outlet, 10" freeboard.
Overall dimensions: 124"H x 56"W x 97"L. |
$11,500 |
$16,500
New 3-compartment floc tank with variable speed mixer
add: $5,500 |
| 343 A |
 |
30 GPM Parkson Type, Lamella, polypro parallel
plates, all fiberglass body, 4' x 10' x 10' Tall. Very good condition. |
$12,500 |
$17,500 |
| 302 A |
 |
30 GPM Lancy, steel construction,
used floc tank with mixer. |
$6,500 |
$9,500 |
| 309 A |
 |
30 GPM Met-Chem, floc tank,
mixer, pH tank. |
$15,500 |
$18,000 |
| New: 344A |
 |
30 GPM Met-Chem, parallel plate clarifier
with floc tank and mixer; epoxy coated steel body with plastic
plates.(6' x 7' x 10' H) |
Regular Price: $28,800 |
Special Web Price:
$27,500 |
| Just Listed:
336B |
 |
50 GPM Parkson Style Lamella Clarifier, steel body with
plastic settling plates. Overall dimensions: 13'H with a 70" x
81" footprint. Add: new floc tank and mixer add:
$3,750
Add New Parkson style floc tank with flash mixer and
slow rake mixer: $6,900 |
$14,000 |
$23,000 |
| 323B |
 |
50 GPM Lanco
Used Clarifier, 74 L x 94 W x
138 H
|
$14,000 |
$22,000 |
|
325 B |
 |
50 GPM Parkson
Lamella Style Used
Fiberglass
Clarifier
|
|
$14,000 |
$23,000 |
| 322 B |
 |
50 GPM, Parkson Lamella
Clarifier, 125 square
feet of settling area,
steel body with plastic
settling plates, Model #
125/55, unit includes
attached floc tank with
slow rake mixer.
|
|
$15,000 |
$24,000 |
| 310 B |
 |
50 GPM,
Parkson Lamella Used Clarifier.
Model 125/55, 125 Square Foot
Settling Area, Steel body with
plastic settling plates.
Includes floc tank with flash
mixer and one slow rake.
Overall
Dimensions: 75 L x 48 W x 153
T
|
|
$14,000 |
$28,000 |
| 312 B |
 |
50 GPM,
Parkson
Lamella Clarifier, 125
square feet of settling area,
steel body with plastic settling
plates, Model # 125/55, Serial #
100063.
Overall
Dimensions: 51 L x 62 W x
128 T
Add New Floc
Tank and Mixer: $3,750
Add New
Parkson Style Floc Tank with
Flash Mixer and Slow Mixer Rake:
$6,900
|
|
$14,000 |
$23,000 |
| 379 A |
 |
Parkson-type used stainless steel clarifier, Model PT 125/55 50 GPM maximum flow, approximately 125 square
feet of settling area set at a 55 degree angle, with stainless steel
settling plates, carbon steel legs and ribbing, 6 outlet and 6 inlet,
gravity in/out design, 3 sludge outlet, overall dimensions 14 H x 4 W x
10 L. No Flocculation tank or mixer.
New
two compartment flocculation tank and flash mixer - consult factory
216-881-7900 |
$26,000 |
$31,000 |
| Just Listed:
332 B |
 |
Water Management 60 GPM Waste
Water Treatment Clarifier, Carbon Steel
Construction with PVC inclined plates, includes
two pretreatment tanks for pH adjust or
flocculent addition. Contact sales to get
pricing on adding mixers, pH probes, metering
pumps, ect.
Overall Dimensions: 195 L x 85 W x 123 H
|
$16,000 |
$24,500 |
|
321 B |
 |
321B/612A- 30 GPM J Mark
Used Clarifier/Waste
Treatment System, with
60 GPM Clarifier and (2)
350 gallons treatment
tanks. Unit has space
for 6 metering
pump/chemical additions
(unit currently has 2
metering pumps. Unit has
2 mixers and a control
panel . A filter press
can be added to make
this a complete waste
water treatment system.
Overall Dimensions:
11'L x 9'3" W x 11'6"
Tall
Call our sales team with
any questions.
|
|
$19,000 |
$24,000 |
| 309 B |
 |
60 GPM, used EIMCO
Delta-Stack Clarifer, 140 Gallon
floc box, .3 HP Lightnin Mixer,
control panel, Serial No.
76513-01
Overall
Dimensions: 102 L x 66 W x
137 T
|
|
$12,000 |
$18,000 |
| 399 A |
 |
60 GPM Used Incline Plate Clarifier with Cone Bottom, 290
gallon Floc tank on side with mixer, estimated 500 feet of settling area.
Total Dimensions: 4 W x 14 L x 7 T |
$22,000 |
$29,000 |
| 397 A |
 |
60 GPM, Met-Chem Style Cone Bottom,
2 Compartment 380 Gallon Flock Box
on side, No Plate Packs, Outside
Dimensions: 8x8x11 Tall
*Price includes new Plate Packs
*Add New Adjustable RPM Flock Mixer:
$1,500
|
|
$14,000 |
$29,000 |
| 398 A |
 |
60 GPM Met-Chem Style Cone Bottom,
No Plates, Outside Dimensions:
8.5x8.5x10 Tall
*Price includes new Plate Packs
*Add New Adjustable RPM Flock Mixer: $1,500
|
|
|
$14,000 |
$29,000 |
| 383 A |
 |
Lancy-style inclined plate used clarifier, 60 GPM, approx
550 square feet of plastic settling plates, includes floc tank with (1)
mixer, (1) 3 outlet, over the top feed, (3) ½ sample ports, overall
dimensions: 140 H x 96 W x 98 L. |
$16,000 |
$24,000 |
| 388 A |
 |
60 GPM, Met-Chem style
used clarifier, (2) all polypro packs, 800 square feet of settling area, (1)
flanged 8 slurry feed 121 H, (1) flanged 6 clean water return 117 H,
(1) 2 tee for sludge removal, (4) FNPT 1 sludge ports, no floc tank.
Overall dimensions 125 H x 104 L x 104 W. |
$22,000 |
$29,000 |
| 389 A |
 |
60 GPM, Met-Chem style used clarifier, no plate packs,
Overall Dimensions 10 H x 8 W x 8 L.
With reconditioning, new floor and plate packs will be installed |
$9,000 |
$29,000 |
| New: 345 A |
|
60 GPM Met-Chem parallel plate clarifier with
floc tank and mixer; epoxy coated steel body with plastic plates.
(7-1/2' x 11' x 10'H) |
Regular Price: $38,000 |
Special Web Price:
$36,500 |
| 375
A |
 |
60 GPM Met-Chem style
used clarifier, steel construction with fiberglass plates,
settling area of approximately 440 square feet, with flocculation tank, no
mixer. 6 flanged waste inlet, 2 sample port, 2 flanged sludge
outlet, 4 flanged clean water outlet. Overall Dimensions: 83 W x 114
H x 140 L. |
$14,000 |
$19,000 (Mixer add:
$2,000) |
| 318
B |
 |
Met-Chem style USED CLARIFIER, 75 GPM, unit
has three sludge cone outlets, unit currently has no plate
packs.
With reconditioning new plate packs and a
floor will be installed.
Contact sales if floc box or mixer are
needed.
|
$11,500 |
$27,000 |
| NEW: 301 B |
|
75 GPM Met-Chem parallel
plate clarifier with flocculation tank and mixer; epoxy coated steel body
with plastic plates. |
$43,000 |
Special
Web Price: $41,500 |
| 394
A |
 |
Met-Chem style 75 GPM
inclined plate used clarifier, 4000 total gallon capacity, gravity in/out design,
(1) 3" feed 11.5' H, (1) 3" clean water return 11' H, sample sludge ports on
cone. Missing inclined plate packs, to be replaced with
reconditioning. No floc tank or mixer. Overall dimensions:
8'W x 16'L x 10'H. |
$11,500 |
$22,000 |
| NEW: 302 B |
|
90
GPM Met-Chem parallel plate clarifier with flocculation tank and mixer;
epoxy coated steel body with plastic plates. |
$49,500 |
Special
Web Price: $48,000 |
| Just Listed: 324
B |
 |
Met-Chem Style 90 GPM Used Waste
Water Treatment Inclined Plate
Clarifier, 2 Sludge Cones.
Overall
Dimensions- 113 L x 138 W x
121 H
|
$20,000 |
$28,000 |
| 307
B |
 |
Met-Chem
Style, 90 GPM Used Clarifier,
New Settling Plate Packs will be
added.
Overall Dimensions: 8.5 L x 9
W x 20 T (Legs can be shortened
to 16 foot if desired)
|
|
N/A |
$30,000 |
| 384 A |
 |
Lancy-style inclined plate clarifier, 100 GPM, approx 1200 square feet of
fiberglass settling plates, floc tank with flash mixer, 4
inlet/outlet, (2) sludge outlet, (2) ½ sample ports, overall dimensions:
156 H x 130 W x 85 L. |
$18,000 |
$25,000 |
| Just Listed: 335
B |
 |
Waterlink/Great
Lakes Enviromental Waste Water
Treatment Clarifier, 120 GPM, steel
body with plastic settling plates,
unit has a stainless steel auger in
the bottom to auger sludge to 1
outlet port, 3 sampling ports, 2 man
ways. Overall Dimensions: 98 L x
105 W x 140 H.
|
$25,000 |
$39,000 |
| 328
B |
 |
120 GPM, Used Waste Water Treatment Clarifier,
Fiberglass Construction for High Temperature
Application, pitched slope bottom
Dimensions: 7 L x 8 W x 8H
|
$20,000 |
$30,000 |
| 316
B |
 |
Parkson Used Clarifier, Model 300/55, 120
GPM maximum flow , 300 square feet of settling area set a 55 degree angle
with plastic settling plates, epoxy coated exterior and interior. Clarifier
has a separate floc box that can be mounted with reconditioning. Floc box
has 1 flash mixer.
|
$24,000 |
$39,000 |
| 315
B |
 |
Parkson Used Clarifier, Model 300/55, 120 GPM maximum flow ,
300 square feet of settling area set a 55 degree angle with
plastic settling plates, epoxy coated exterior and interior, 6
Outlet/Inlet, gravity in/out design, 3 sludge outlet. Unit is
missing lower part of back legs. They will be replaced with
reconditioning.
Overall Dimensions 14 H x 11 L x 6 W. No flocculation tank
or mixer.
Add New Floc Tank and Mixer: $3,750
Add New Parkson Style Floc Tank with Flash Mixer and
Slow Mixer Rake: $6,900
|
$20,000 |
$30,000 |
| 380
A |
 |
Parkson, Model 300/55, 120 GPM
maximum flow , 300 square feet of settling area set a 55 degree angle with
plastic settling plates, epoxy coated exterior and interior, 6
Outlet/Inlet, gravity in/out design, 3 sludge outlet, Serial No.
4714.11.97, Manufactured in November of 1997, Overall Dimensions 14 H x 11
L x 6 W. No flocculation tank or mixer.
New
two compartment floc tank and (1) flash mixer
$6,900 |
$21,000 |
$29,000 |
| 386
A |
 |
Lancy-style inclined plate used clarifier, 120 GPM, approx
1000 square feet of settling plates, no floc tank, no mixer, 4
inlet/outlet, 3 flanged sludge outlet, overall dimensions: 10 H x 10 W x
8 L.
For
New floc tank and adjustable floc mixer
ADD: $7,900 |
$20,000 |
$28,000 |
| 376
A |
 |
120 GPM Lanco style
used clarifier, steel construction with plastic settling plates, settling area of
approximately 440 square feet, with flocculation tank, no mixer. 6
flanged waste inlet, 2 flanged sludge outlet, 6 flanged clean water
outlet. Overall Dimensions: 56 W x 114 H x 185 L. |
$20,000 |
$28,00 0(Mixer add:
$2,500) |
| New: 346 A |
 |
120 GPM Met-Chem parallel plate clarifier
with flocculation tank and mixer; epoxy coated steel body with plastic
plates. (11-1/2' x 14' x 12'H) |
Regular Price: $58,000 |
Special Web Price:
$56,500 |
| New: 303 B |
|
150 GPM Met-Chem parallel plate clarifier
with flocculation tank and mixer; epoxy coated steel body with plastic
plates. |
Regular Price: $66,500 |
Special Web Price:
$64,500 |
| New: 347 A |
|
180 GPM Met-Chem parallel plate clarifier
with flocculation tank and mixer; epoxy coated steel body with plastic
plates. (12' x 18' x 12'H) |
Regular Price: $76,800 |
Special Web Price:
$75,000 |
| Just Listed: 333
B |
 |
333B-228
GPM Parkson Lamella used waste water treatment
clarifier, M/N# 570/55, steel construction with
FRP settling plates with 570 square feet of
settling area.
Overall Dimensions: 14'L x 7'W x 14'H, includes
legs.
Please call sales at 216-881-7900 if interested
in a price adder for floc tank with flash and
slow rake mixers.
|
$30,000 |
$46,500 |
| 327
B |
 |
228 GPM Parkson Lamella used clarifier, M/N# 570/55,
steel construction with FRP settling plates with 570
square feet of settling area, unit has a two
compartment flocculation tank, no mixers,
Overall Dimensions: 14'L x 7'W x 14'H, includes
legs.
Please call sales at 216-881-7900 if interested in a
price adder for flash and slow rake mixers.
|
$34,000 |
$49,500 |
| Sold! 314
B |
 |
228 GPM Parkson Lamella used clarifier, M/N# 570/55, steel construction with
FRP settling plates with 570 square feet of settling area, with flocculation
tank, flash mixer and slow rake mixer. Unit also has a control panel. 12
x 6 square waste water inlet, 4 flanged sludge outlet, 8 clean water
outlet. Overall Dimensions: 15'L x 9'W x 8'H, includes legs. |
$36,000 |
$55,000 |
| 326
B |
 |
228 GPM Parkson Lamella
used clarifier, M/N#
570/55, S/N#
1005630603, steel
construction with FRP
settling plates with 570
square feet of settling
area, no flocculation
tank, no mixer. 12 x
6 square waste water
inlet, 4 flanged
sludge outlet, 8 clean
water outlet. Overall
Dimensions: 14'L x 7'W x
14'H, includes legs.
Please call sales at
216-881-7900 if
interested in a price
adder for floc tank and
mixers.
|
|
$30,500 |
$46,500 |
| New: 304 B |
|
240 GPM Met-Chem clarifier with flocculation
tank and mixer; epoxy coated steel body with plastic plates. |
Regular Price: $86,400 |
Special
Web Price: $84,000 |
| New: 348 A |
|
300 GPM Met-Chem clarifier with flocculation
tank and mixer; epoxy coated steel body with plastic plates. (10' x
28' x 12'H) |
Regular Price: $102,000 |
Special
Web Price: $98,000 |
| New: 305 B |
|
360 GPM Met-Chem clarifier with flocculation
tank and mixer; epoxy coated steel body with plastic plates. |
Regular Price: $121,800 |
Special
Web Price: $118,000 |
| 355 A |
 |
Used Parkson clarifier, Model
1135/55, 500GPM flow rate, approximately 1135 sq. ft. of settling area set
at a 55 degree angle, FRP settling plates, steel weirs, with floc tank,
mixer and legs, 9"W x 15" L x 17"H. |
$50,000 |
$90,000 |
