used sludge dryers

Inventory Of Used Equipment

Filter Presses (100s)     Sludge Dryers(200s)     Clarifiers (300s)     Plating Machines (400s)

Scrubbers (500s)     Waste Water Treatment Systems (600s)   

Ovens (700s)     Misc Waste Treatment Equipment (800s)    

Misc. (900s)     Spin Dryers (1000s)    Pressure Filters(1100)   Rectifiers (1200)

Water Treatment (1300)   Used Pumps (1400)   Used Sand Filters (1500)  Used Evaporators (1600)    Used Tanks (1800)    Corrosion Chambers

USED SLUDGE DRYER INVENTORY - As of 6-19-13

Click on Inventory # to view picture


Contact Us
 
INVENTORY # Click to enlarge DESCRIPTION listed from smallest to largest AS IS RECONDITIONED*
220 A JWI Sludge Dryer

JWI 120-G (Gas Fired) 1.5 cu. ft./hour.   Sludge hopper is stainless steel.  Call for scrubber availability and pricing.

$12,000 $28,000
224 A sludge dryer JWI 120-G (Gas Fired) 1.5 cu. ft./hour (As is - missing parts).  Call for scrubber availability and pricing. $12,000 $28,000
240 A
JWI 180-G gas-fired sludge dryer, 2 cu. ft./hr, continuous feed system with SS wetted parts including SS conveyor, SS internal shell, and SS 20 cu. ft. hopper, includes 304SS venturi scrubber with 3/4 HP cast aluminum blower, 460V/230V power usage, 1.5 HP TEFC extruder motor, 1 HP TEFC gas blower motor, 1 HP TEFC scrubber motor, 1/20th HP TEFC cooling blowers, 4-6 GPM @46-145 PSI scrubber water requirement, 500-600 deg. F operating temperature, 250-325 CFM @ 160-200 Deg. F exhaust air, includes control panel to control: temperature set-points, start/run/stall conveyor, scrubber on/off, emergency stop, variable extruder motor speed control, variable conveyor motor speed control, indicators for air purge cycle, conveyor blower, gas burner, extruder power, high temperature lockout.
$30,000 $38,500
232 A JWI 180-G gas-fired sludge dryer, 2 cu. ft./hr, continuous feed system with SS wetted parts including SS conveyor, SS internal shell, and SS 20 cu. ft. hopper, includes 304SS venturi scrubber with 3/4 HP cast aluminum blower, 460V/230V power usage, 1.5 HP TEFC extruder motor, 1 HP TEFC gas blower motor, 1 HP TEFC scrubber motor, 1/20th HP TEFC cooling blowers, 4-6 GPM @46-145 PSI scrubber water requirement,  500-600 deg. F operating temperature, 250-325 CFM @ 160-200 Deg. F exhaust air, includes control panel to control:  temperature set-points, start/run/stall conveyor, scrubber on/off, emergency stop, variable extruder motor speed control, variable conveyor motor speed control, indicators for air purge cycle, conveyor blower, gas burner, extruder power, high temperature lockout.  Missing conveyor gear-box, and single conveyor axle. $30,000 $38,500
Just Listed:  242 A
JWI SLUDGE DRYER, 2-3 cubic foot per hour continuoussludge dryer, includes scrubber and sludge hopper.
Overall Dimensions: 150” L x 45” W x 85” H
 
$25,000 $34,000
Just Listed:  241A
Fenton Sludge Master Continuous Dryer, 2 to 4 cubic foot per hour, with sludge hopper.

 
Sludge Dryer Dimensions: 138” L x 40” W x 70” T
 
$25,000 $35,000
Sold! 237 A JWI 360 Gas Fired, 4 cubic foot per hour, with scrubber $30,000 $60,000
215 A sludge dryer

Fenton Sludge Master III Continuous Dryer, 2 to 4 cubic foot per hour, double burner, large hopper, unit and hopper have wheels.

Sludge Dryer Dimensions: 127” L x 36” W x 66” T

Hopper Dimensions: 60” L x 84” W x 77” T 

Optional wet scrubber:  $7,950

 

Unit currently is missing Auger and Burners. They will be replaced with reconditioning.

$14,000 $40,000
229 A sludge dryer Conrec 5 cu. ft. batch sludge dryer; electric heat with optional continuous forward/reverse module.  In working condition prior to replacement in October '06.  Dimensions:  77"L x 47" W x 25"H.  Split lid. $10,000 $20,000
230 A sludge dryer Met-Chem, 6 cu. ft. sludge dryer, batch style, steam heated, 304 SS wetted parts, double auger, SS lid, 5 HP chain driven auger motor, 304 SS scrubber with 1 HP blower, automatic dump, auger and blower controls with control panel. $12,500 $25,000
212A sludge dryer Conrec, electric, 10 cu. ft., batch on a stand $18,000 $38,000
Sold! 206 A sludge dryer Met-Chem, hot water/steam, 30 cu. ft., batch with fume scrubber.  Reconditioned price includes new control panel.  As is has no panel. $40,000 $78,000

*All reconditioned equipment comes with a 30 day warranty

Back to Home    Back to Top    Used Equipment      Sludge Dryers

Request Info

Contact Us:  777 East 82 Street ~ Cleveland, Ohio 44103
(216) 881-7900 ~ FAX (216) 881-8950  ~ info@metchem.com